The aim for this project is to create the worlds best and hottest interface to interact with aria2. Very simple to use, just download and open index.html in any web browser.
The aim for this project is to create the worlds best and hottest interface to interact with aria2. aria2 is the worlds best file downloader, but sometimes the command line brings more power than necessary. The project was initially created as part of the GSOC scheme, however it has rapidly grown and changed with tremendous support and feedback from the aria2 community.
Very simple to use, no build scripts, no installation scripts. First start aria2 in the background either in your local machine or in a remote one. You can do that as follows:
aria2c --enable-rpc --rpc-listen-all
If aria2 is not installed in your local machine then head on to https://aria2.github.io/ and follow the instructions there.
Then to use the WebUI-Aria2,
Read and edit configuration.js.
This feature allows users to download files that they download from aria2 directly from the webui dashboard. If you are familiar with how webservers work, setup a http server that points at the configured aria2 download directory, check permissions. Then Specify a full url:
http://server:port/in the webui directURL configuration.
If the above is not obvious, keep reading what this is about in directurl.md
Well, you need aria2. And a web browser (if that even counts!)
There is two Dockerfile in this project, one is a common Dockerfile, which can be use for testing purpose.
The second is a production ready Dockerfile for arm32v7 platforms (including Raspberry Pi).
You can also try or use webui-aria2 in your LAN inside a Docker sandbox.
Build the image
sudo docker build -t yourname/webui-aria2 .
..and run it! It will be available at:
sudo docker run -v /Downloads:/data -p 6800:6800 -p 9100:8080 --name="webui-aria2" yourname/webui-aria2
/Downloadsis the directory in the host where you want to keep the downloaded files
This image contains both aria2 and webui-aria2.
Build it (may take several hours due to the aria2 compilation process. Don't panic and grab a coffee).
docker build -f Dockerfile.arm32v7 -t yourname/webui-aria2 .
This command will ends up building three images:
ARIA2_VERSIONis changed in the Dockerfile, otherwise you won't benefit from the update.
Prepare the host volume: This image required few file to be mounted in the container.
/home/aria/aria2/session.txt (empty file) /home/aria/aria2/aria2.log (empty file) /home/aria/aria2/aria2.conf (aria2 configuration file, not webui-aria2 conf) must contains at least `enable-rpc=true` and `rpc-listen-all=true` /data/downloads/ (where the downloaded files goes)
docker run --restart=always \ -v /home//data/aria2/downloads:/data/downloads \ -v /home//data/aria2/.aria2:/home/aria/.aria2 \ -p 6800:6800 -p 9100:8080 \ --name="webui-aria2" \ -d yourname/webui-aria2
Checkout contributor's guide to know more about how to contribute to this project.
For any support, feature request and bug report add an issue in the github project. link
Refer to the LICENSE file (MIT License). If the more liberal license is needed then add it as an issue