Need help with npeg?
Click the “chat” button below for chat support from the developer who created it, or find similar developers for support.

About the developer

zevv
183 Stars 10 Forks MIT License 577 Commits 6 Opened issues

Description

PEGs for Nim, another take

Services available

!
?

Need anything else?

Contributors list

# 89,204
Nim
peg
forth
Neovim
488 commits
# 67,689
Nim
procedu...
Shell
macros
5 commits
# 58,643
Nim
Shell
procedu...
macros
2 commits
# 312,989
Nim
Shell
pde
Lua
1 commit
# 23,593
Nim
repl
procedu...
macros
1 commit

License: MIT Stability: experimental

NPeg

"Because friends don't let friends write parsers by hand"

NPeg is a pure Nim pattern matching library. It provides macros to compile patterns and grammars (PEGs) to Nim procedures which will parse a string and collect selected parts of the input. PEGs are not unlike regular expressions, but offer more power and flexibility, and have less ambiguities. (More about PEGs on Wikipedia)

Graph

Some use cases where NPeg is useful are configuration or data file parsers, robust protocol implementations, input validation, lexing of programming languages or domain specific languages.

Some NPeg highlights:

  • Grammar definitions and Nim code can be freely mixed. Nim code is embedded using the normal Nim code block syntax, and does not disrupt the grammar definition.

  • NPeg-generated parsers can be used both at run and at compile time.

  • NPeg offers various methods for tracing, optimizing and debugging your parsers.

  • NPeg can parse sequences of any data types, also making it suitable as a stage-two parser for lexed tokens.

  • NPeg can draw cool diagrams.

Quickstart

Here is a simple example showing the power of NPeg: The macro

peg
compiles a grammar definition into a
parser
object, which is used to match a string and place the key-value pairs into the Nim table
words
:
import npeg, strutils, tables

type Dict = Table[string, int]

let parser = peg("pairs", d: Dict): pairs word * '=' * >number: d[$1] = parseInt($2)

var words: Table[string, int] doAssert parser.match("one=1,two=2,three=3,four=4", words).ok echo words

Output:

{"two": 2, "three": 3, "one": 1, "four": 4}

A brief explanation of the above code:

  • The macro

    peg
    is used to create a parser object, which uses
    pairs
    as the initial grammar rule to match. The variable
    d
    of type
    Dict
    will be available inside the code block parser for storing the parsed data.
  • The rule

    pairs
    matches one
    pair
    , followed by zero or more times (
    *
    ) a comma followed by a
    pair
    .
  • The rules

    word
    and
    number
    match a sequence of one or more (
    +
    ) alphabetic characters or digits, respectively. The
    Alpha
    and
    Digit
    rules are pre-defined rules matching the character classes
    {'A'..'Z','a'..'z'}
    and
    {'0'..'9'}
    .
  • The rule

    pair
    matches a
    word
    , followed by an equals sign (
    =
    ), followed by a
    number
    .
  • The

    word
    and
    number
    in the
    pair
    rule are captured with the
    >
    operator. The Nim code fragment below this rule is executed for every match, and stores the captured word and number in the
    words
    Nim table.

Usage

The

patt()
and
peg()
macros can be used to compile parser functions:
  • patt()
    creates a parser from a single anonymous pattern.
  • peg()
    allows the definition of a set of (potentially recursive) rules making up a complete grammar.

The result of these macros is an object of the type

Parser
which can be used to parse a subject:
proc match(p: Parser, s: string) = MatchResult
proc matchFile(p: Parser, fname: string) = MatchResult

The above

match
functions returns an object of the type
MatchResult
:
MatchResult = object
  ok: bool
  matchLen: int
  matchMax: int
  ...
  • ok
    : A boolean indicating if the matching succeeded without error. Note that a successful match does not imply that all of the subject was matched, unless the pattern explicitly matches the end-of-string.
  • matchLen
    : The number of input bytes of the subject that successfully matched.
  • matchMax
    : The highest index into the subject that was reached during parsing, even if matching was backtracked or did not succeed. This offset is usually a good indication of the location where the matching error occurred.

The string captures made during the parsing can be accessed with:

proc captures(m: MatchResult): seq[string]

Simple patterns

A simple pattern can be compiled with the

patt
macro.

For example, the pattern below splits a string by white space:

let parser = patt *(*' ' * > +(1-' '))
echo parser.match("   one two three ").captures

Output:

@["one", "two", "three"]

The

patt
macro can take an optional code block which is used as code block capture for the pattern:
var key, val: string
let p = patt >+Digit * "=" * >+Alpha:
  (key, val) = ($1, $2)

assert p.match("15=fifteen").ok echo key, " = ", val

Grammars

The

peg
macro provides a method to define (recursive) grammars. The first argument is the name of initial patterns, followed by a list of named patterns. Patterns can now refer to other patterns by name, allowing for recursion:
let parser = peg "ident":
  lower 

The order in which the grammar patterns are defined affects the generated parser. Although NPeg could always reorder, this is a design choice to give the user more control over the generated parser:

  • when a pattern

    P1
    refers to pattern
    P2
    which is defined before
    P1
    ,
    P2
    will be inlined in
    P1
    . This increases the generated code size, but generally improves performance.
  • when a pattern

    P1
    refers to pattern
    P2
    which is defined after
    P1
    ,
    P2
    will be generated as a subroutine which gets called from
    P1
    . This will reduce code size, but might also result in a slower parser.

Syntax

The NPeg syntax is similar to normal PEG notation, but some changes were made to allow the grammar to be properly parsed by the Nim compiler:

  • NPeg uses prefixes instead of suffixes for
    *
    ,
    +
    ,
    -
    and
    ?
    .
  • Ordered choice uses
    |
    instead of
    /
    because of operator precedence.
  • The explicit
    *
    infix operator is used for sequences.

NPeg patterns and grammars can be composed from the following parts:

Atoms:

0 # matches always and consumes nothing 1 # matches any character n # matches exactly n characters 'x' # matches literal character 'x' "xyz" # matches literal string "xyz" i"xyz" # matches literal string, case insensitive {'x'..'y'} # matches any character in the range from 'x'..'y' {'x','y','z'} # matches any character from the set

Operators:

P1 * P2 # concatenation P1 | P2 # ordered choice P1 - P2 # matches P1 if P2 does not match (P) # grouping !P # matches everything but P &P # matches P without consuming input ?P # matches P zero or one times *P # matches P zero or more times +P # matches P one or more times @P # search for P P[n] # matches P n times P[m..n] # matches P m to n times

Precedence operators:

P ^ N # P is left associative with precedence N P ^^ N # P is right associative with precedence N

String captures:

>P # Captures the string matching P

Back references:

R("tag", P) # Create a named reference for pattern P R("tag") # Matches the given named reference

Error handling:

E"msg" # Raise an execption with the given message

In addition to the above, NPeg provides the following built-in shortcuts for common atoms, corresponding to POSIX character classes:

  Alnum  

Atoms

Atoms are the basic building blocks for a grammar, describing the parts of the subject that should be matched.

  • Integer literal:
    0
    /
    1
    /
    n

The int literal atom

n
matches exactly n number of bytes.
0
always matches, but does not consume any data.
  • Character and string literals:
    'x'
    /
    "xyz"
    /
    i"xyz"

Characters and strings are literally matched. If a string is prefixed with

i
, it will be matched case insensitive.
  • Character sets:
    {'x','y'}

Characters set notation is similar to native Nim. A set consists of zero or more comma separated characters or character ranges.

   {'x'..'y'}    # matches any character in the range from 'x'..'y'
   {'x','y','z'} # matches any character from the set 'x', 'y', and 'z'

The set syntax

{}
is flexible and can take multiple ranges and characters in one expression, for example
{'0'..'9','a'..'f','A'..'F'}
.

Operators

NPeg provides various prefix, infix and suffix operators. These operators combine or transform one or more patterns into expressions, building larger patterns.

  • Concatenation:
    P1 * P2
  o──[P1]───[P2]──o

The pattern

P1 * P2
returns a new pattern that matches only if first
P1
matches, followed by
P2
.

For example,

"foo" * "bar"
would only match the string
"foobar"
.
  • Ordered choice:
    P1 | P2
  o─┬─[P1]─┬─o
    ╰─[P2]─╯

The pattern

P1 | P2
tries to first match pattern
P1
. If this succeeds, matching will proceed without trying
P2
. Only if
P1
can not be matched, NPeg will backtrack and try to match
P2
instead. Once either
P1
or
P2
has matched, the choice will be final ("commited"), and no more backtracking will be possible for this choice.

For example

("foo" | "bar") * "fizz"
would match both
"foofizz"
and
"barfizz"
.

NPeg optimizes the

|
operator for characters and character sets: The pattern
'a' | 'b' | 'c'
will be rewritten to a character set
{'a','b','c'}
.
  • Difference:
    P1 - P2

The pattern

P1 - P2
matches
P1
only if
P2
does not match. This is equivalent to
!P2 * P1
:
     ━━━━
  o──[P2]─»─[P1]──o

NPeg optimizes the

-
operator for characters and character sets: The pattern
{'a','b','c'} - 'b'
will be rewritten to the character set
{'a','c'}
.
  • Grouping:
    (P)

Brackets are used to group patterns similar to normal arithmetic expressions.

  • Not-predicate:
    !P
     ━━━
  o──[P]──o

The pattern

!P
returns a pattern that matches only if the input does not match
P
. In contrast to most other patterns, this pattern does not consume any input.

A common usage for this operator is the pattern

!1
, meaning "only succeed if there is not a single character left to match" - which is only true for the end of the string.
  • And-predicate:
    &P
     ━━━
     ━━━
  o──[P]──o

The pattern

&P
matches only if the input matches
P
, but will not consume any input. This is equivalent to
!!P
. This is denoted by a double negation in the railroad diagram, which is not very pretty unfortunately.
  • Optional:
    ?P
    ╭──»──╮
  o─┴─[P]─┴─o

The pattern

?P
matches if
P
can be matched zero or more times, so essentially succeeds if
P
either matches or not.

For example,

?"foo" * bar"
matches both
"foobar"
and
"bar"
.
  • Match zero or more times:
    *P
    ╭───»───╮
  o─┴┬─[P]─┬┴─o
     ╰──«──╯

The pattern

*P
tries to match as many occurrences of pattern
P
as possible - this operator always behaves greedily.

For example,

*"foo" * "bar"
matches
"bar"
,
"fooboar"
,
"foofoobar"
, etc.
  • Match one or more times:
    +P
  o─┬─[P]─┬─o
    ╰──«──╯

The pattern

+P
matches
P
at least once, but also more times. It is equivalent to the
P * *P
- this operator always behave greedily.
  • Search:
    @P

This operator searches for pattern

P
using an optimized implementation. It is equivalent to
s , which can be read as "try to match as
  many characters as possible not matching 
P
, and then match
P
:
    ╭─────»─────╮
    │  ━━━      │
  o─┴┬─[P]─»─1─┬┴»─[P]──o
     ╰────«────╯

Note that this operator does not allow capturing the skipped data up to the match; if his is required you can manually construct a grammar to do this.

  • Match exactly
    n
    times:
    P[n]

The pattern

P[n]
matches
P
exactly
n
times.

For example,

"foo"[3]
only matches the string
"foofoofoo"
:
  o──[P]─»─[P]─»─[P]──o
  • Match
    m
    to
    n
    times:
    P[m..n]

The pattern

P[m..n]
matches
P
at least
m
and at most
n
times.

For example,

"foo[1,3]"
matches
"foo"
,
"foofoo"
and
"foofoofo"
:
          ╭──»──╮ ╭──»──╮
  o──[P]─»┴─[P]─┴»┴─[P]─┴─o

Precedence operators

Note: This is an experimental feature, the implementation or API might change in the future.

Precedence operators allows for the construction of "precedence climbing" or "Pratt parsers" with NPeg. The main use for this feature is building parsers for programming languages that follow the usual precedence and associativity rules of arithmetic expressions.

  • Left associative precedence of
    N
    :
    P ^ N
   <1<   
o──[P]──o
  • Right associative precedence of
    N
    :
    P ^^ N
   >1> 
o──[P]──o

During parsing NPeg keeps track of the current precedence level of the parsed expression - the default is

0
if no precedence has been assigned yet. When the
^
operator is matched, either one of the next three cases applies:
  • P ^ N
    where
    N > 0
    and
    N
    is lower then the current precedence: in this case the current precedence is set to
    N
    and parsing of pattern
    P
    continues.
  • P ^ N
    where
    N > 0
    and
    N
    is higher or equal then the current precedence: parsing will fail and backtrack.
  • P ^ 0
    : resets the current precedence to 0 and continues parsing. This main use case for this is parsing sub-expressions in parentheses.

The heart of a Prett parser in NPeg would look something like this:

exp 

More extensive documentation will be added later, for now take a look at the example in

tests/precedence.nim
.

Captures

     ╭╶╶╶╶╶╮
s o────[P]────o
     ╰╶╶╶╶╶╯

NPeg supports a number of ways to capture data when parsing a string. The various capture methods are described here, including a concise example.

The capture examples below build on the following small PEG, which parses a comma separated list of key-value pairs:

const data = "one=1,two=2,three=3,four=4"

let parser = peg "pairs": pairs

String captures

The basic method for capturing is marking parts of the peg with the capture prefix

>
. During parsing NPeg keeps track of all matches, properly discarding any matches which were invalidated by backtracking. Only when parsing has fully succeeded it creates a
seq[string]
of all matched parts, which is then returned in the
MatchData.captures
field.

In the example, the

>
capture prefix is added to the
word
and
number
rules, causing the matched words and numbers to be appended to the result capture
seq[string]
:
let parser = peg "pairs":
  pairs word * '=' * >number

let r = parser.match(data)

The resulting list of captures is now:

@["one", "1", "two", "2", "three", "3", "four", "4"]

Code block captures

Code block captures offer the most flexibility for accessing matched data in NPeg. This allows you to define a grammar with embedded Nim code for handling the data during parsing.

Note that for code block captures, the Nim code gets executed during parsing, even if the match is part of a pattern that fails and is later backtracked.

When a grammar rule ends with a colon

:
, the next indented block in the grammar is interpreted as Nim code, which gets executed when the rule has been matched. Any string captures that were made inside the rule are available to the Nim code in the injected variable
capture[]
of type
seq[Capture]
:
type Capture = object
  s*: string      # The captured string
  si*: int        # The index of the captured string in the subject

The total subject matched by the code block rule is available in

capture[0]
Any additional explicit
>
string captures made by the rule or any of its child rules will be available as
capture[1]
,
capture[2]
, ...

For convenience there is syntactic sugar available in the code block capture blocks:

  • The variables

    $0
    to
    $9
    are rewritten to
    capture[n].s
    and can be used to access the captured strings. The
    $
    operator uses then usual Nim precedence, thus these variables might need parentheses or different ordering in some cases, for example
    $1.parseInt
    should be written as
    parseInt($1)
    .
  • The variables

    @0
    to
    @9
    are rewritten to
    capture[n].si
    and can be used to access the offset in the subject of the matched captures.

Example: ```nim let p = peg foo: foo <- >(1 * >1) * 1: echo "$0 = ", $0 echo "$1 = ", $1 echo "$2 = ", $2

echo p.match("abc").ok ```

Will output

$0 = abc
$1 = ab
$2 = b

Code block captures consume all embedded string captures, so these captures will no longer be available after matching.

A code block capture can also produce captures by calling the

push(s: string)
function from the code block. Note that this is an experimental feature and that the API might change in future versions.

The example has been extended to capture each word and number with the

>
string capture prefix. When the
pair
rule is matched, the attached code block is executed, which adds the parsed key and value to the
words
table.
from strutils import parseInt
var words = initTable[string, int]()

let parser = peg "pairs": pairs word * '=' * >number: words[$1] = parseInt($2)

let r = parser.match(data)

After the parsing finished, the

words
table will now contain:
{"two": 2, "three": 3, "one": 1, "four": 4}

Custom match validations

Code block captures can be used for additional validation of a captured string: the code block can call the functions

fail()
or
validate(bool)
to indicate if the match should succeed or fail. Failing matches are handled as if the capture itself failed and will result in the usual backtracking. When the
fail()
or
validate()
functions are not called, the match will succeed implicitly.

For example, the following rule will check if a passed number is a valid

uint8
number:
uint8 Digit[1..3]:
  let v = parseInt($a)
  validate v>=0 and v<=255

The following grammar will cause the whole parse to fail when the

error
rule matches:
error 

Note: The Nim code block is running within the NPeg parser context and in theory could access to its internal state - this could be used to create custom validator/matcher functions that can inspect the subject string, do lookahead or lookback, and adjust the subject index to consume input. At the time of writing, NPeg lacks a formal API or interface for this though, and I am not sure yet what this should look like - If you are interested in doing this, contact me so we can discuss the details.

Passing state

NPeg allows passing of data of a specific type to the

match()
function, this value is then available inside code blocks as a variable. This mitigates the need for global variables for storing or retrieving data in access captures.

The syntax for defining a generic grammar is as follows:

peg(name, identifier: Type)

For example, the above parser can be rewritten using a generic parser as such:

type Dict = Table[string, int]

let parser = peg("pairs", userdata: Dict): pairs word * '=' * >number: userdata[$1] = parseInt($2)

var words: Dict let r = parser.match(data, words)

Backreferences

Backreferences allow NPeg to match an exact string that matched earlier in the grammar. This can be useful to match repetitions of the same word, or for example to match so called here-documents in programming languages.

For this, NPeg offers the

R
operator with the following two uses:

  • The

    R(name, P)
    pattern creates a named reference for pattern
    P
    which can be referred to by name in other places in the grammar.
  • The pattern

    R(name)
    matches the contents of the named reference that earlier been stored with
    R(name, P)
    pattern.

For example, the following rule will match only a string which will have the same character in the first and last position:

patt R("c", 1) * *(1 - R("c")) * R("c") * !1

The first part of the rule

R("c", 1)
will match any character, and store this in the named reference
c
. The second part will match a sequence of zero or more characters that do not match reference
c
, followed by reference
c
.

More about grammars

Ordering of rules in a grammar

Repetitive inlining of rules might cause a grammar to grow too large, resulting in a huge executable size and slow compilation. NPeg tries to mitigate this in two ways:

  • Patterns that are too large will not be inlined, even if the above ordering rules apply.

  • NPeg checks the size of the total grammar, and if it thinks it is too large it will fail compilation with the error message

    NPeg: grammar too complex
    .

Check the section "Compile-time configuration" below for more details about too complex grammars.

The parser size and performance depends on many factors; when performance and/or code size matters, it pays to experiment with different orderings and measure the results.

When in doubt, check the generated parser instructions by compiling with the

-d:npegTrace
or
-d:npegDotDir
flags - see the section Tracing and Debugging for more information.

At this time the upper limit is 4096 rules, this might become a configurable number in a future release.

For example, the following grammar will not compile because recursive inlining will cause it to expand to a parser with more then 4^6 = 4096 rules:

let p = peg "z":
  f 

The fix is to change the order of the rules so that instead of inlining NPeg will use a calling mechanism:

let p = peg "z":
  z 

When in doubt check the generated parser instructions by compiling with the

-d:npegTrace
flag - see the section Tracing and Debugging for more information.

Templates, or parameterized rules

When building more complex grammars you may find yourself duplicating certain constructs in patterns over and over again. To avoid code repetition (DRY), NPeg provides a simple mechanism to allow the creation of parameterized rules. In good Nim-fashion these rules are called "templates". Templates are defined just like normal rules, but have a list of arguments, which are referred to in the rule. Technically, templates just perform a basic search-and-replace operation: every occurrence of a named argument is replaced by the exact pattern passed to the template when called.

For example, consider the following grammar:

numberList 

This snippet uses a common pattern twice for matching lists:

p * *( ',' * p)
. This matches pattern
p
, followed by zero or more occurrences of a comma followed by pattern
p
. For example,
numberList
will match the string
1,22,3
.

The above example can be parameterized with a template like this:

commaList(item) 

Here the template

commaList
is defined, and any occurrence of its argument 'item' will be replaced with the patterns passed when calling the template. This template is used to define the more complex patterns
numberList
and
wordList
.

Templates may invoke other templates recursively; for example the above can even be further generalized:

list(item, sep) 

Composing grammars with libraries

For simple grammars it is usually fine to build all patterns from scratch from atoms and operators, but for more complex grammars it makes sense to define reusable patterns as basic building blocks.

For this, NPeg keeps track of a global library of patterns and templates. The

grammar
macro can be used to add rules or templates to this library. All patterns in the library will be stored with a qualified identifier in the form
libraryname.patternname
, by which they can be referred to at a later time.

For example, the following fragment defines three rules in the library with the name

number
. The rules will be stored in the global library and are referred to in the peg by their qualified names
number.dec
,
number.hex
and
number.oct
:
grammar "number":
  dec 

NPeg offers a number of pre-defined libraries for your convenience, these can be found in the

npeg/lib
directory. A library an be imported with the regular Nim
import
statement, all rules defined in the imported file will then be added to NPeg's global pattern library. For example:
import npeg/lib/uri

Library rule overriding/shadowing

To allow the user to add custom captures to imported grammars or rules, it is possible to override or shadow an existing rule in a grammar.

Overriding will replace the rule from the library with the provided new rule, allowing the caller to change parts of an imported grammar. A overridden rule is allowed to reference the original rule by name, which will cause the new rule to shadow the original rule. This will effectively rename the original rule and replace it with the newly defined rule which will call the original referred rule.

For example, the following snippet will reuse the grammar from the

uri
library and capture some parts of the URI in a Nim object:
import npeg/lib/uri

type Uri = object host: string scheme: string path: string port: int

var myUri: Uri

let parser = peg "line": line uri.scheme: myUri.scheme = $1 uri.host uri.host: myUri.host = $1 uri.port uri.port: myUri.port = parseInt($1) uri.path uri.path: myUri.path = $1

echo parser.match("http://nim-lang.org:8080/one/two/three") echo myUri # --> (host: "nim-lang.org", scheme: "http", path: "/one/two/three", port: 8080)

Advanced topics

Parsing other types then strings

Note: This is an experimental feature, the implementation or API might change in the future.

NPeg was originally designed to parse strings like a regular PEG engine, but has since evolved into a generic parser that can parse any subject of type

openArray[T]
. This section describes how to use this feature.

  • The

    peg()
    macro must be passed an additional argument specifying the base type
    T
    of the subject; the generated parser will then parse a subject of type
    openArray[T]
    . When not given, the default type is
    char
    , and the parser parsers
    openArray[char]
    , or more typically,
    string
    .
  • When matching non-strings, some of the usual atoms like strings or character sets do not make sense in a grammar, instead the grammar uses literal atoms. Literals can be specified in square brackets and are interpreted as any Nim code:

    [foo]
    ,
    [1+1]
    or
    ["foo"]
    are all valid literals.
  • When matching non-strings, captures will be limited to only a single element of the base type, as this makes more sense when parsing a token stream.

For an example of this feature check the example in

tests/lexparse.nim
- this implements a classic parser with separate lexing and parsing stages.

Some notes on using PEGs

Anchoring and searching

Unlike regular expressions, PEGs are always matched in anchored mode only: the defined pattern is matched from the start of the subject string. For example, the pattern

"bar"
does not match the string
"foobar"
.

To search for a pattern in a stream, a construct like this can be used:

p 

The above grammar first tries to match pattern

p
, or if that fails, matches any character
1
and recurs back to itself. Because searching is a common operation, NPeg provides the builtin
@P
operator for this.

End of string

PEGs do not care what is in the subject string after the matching succeeds. For example, the rule

"foo"
happily matches the string
"foobar"
. To make sure the pattern matches the end of string, this has to be made explicit in the pattern.

The idiomatic notation for this is

!1
, meaning "only succeed if there is not a single character left to match" - which is only true for the end of the string.

Non-consuming atoms and captures

The lookahead(

&
) and not(
!
) operators may not consume any input, and make sure that after matching the internal parsing state of the parser is reset to as is was before the operator was started, including the state of the captures. This means that any captures made inside a
&
and
!
block also are discarded. It is possible however to capture the contents of a non-consuming block with a code block capture, as these are always executed, even when the parser state is rolled back afterwards.

Parsing error handling

NPeg offers a number of ways to handle errors during parsing a subject string:

The

ok
field in the
MatchResult
indicates if the parser was successful: when the complete pattern has been matched this value will be set to
true
, if the complete pattern did not match the subject the value will be
false
.

In addition to the

ok
field, the
matchMax
field indicates the maximum offset into the subject the parser was able to match the string. If the matching succeeded
matchMax
equals the total length of the subject, if the matching failed, the value of
matchMax
is usually a good indication of where in the subject string the error occurred.

When, during matching, the parser reaches an

E"message"
atom in the grammar, NPeg will raise an
NPegException
exception with the given message. The typical use case for this atom is to be combine with the ordered choice
|
operator to generate helpful error messages. The following example illustrates this:
let parser = peg "list":
  list 

The rule

word
looks for a sequence of one or more letters (
+{'a'..'z'}
). If can this not be matched the
E"word"
matches instead, raising an exception:
Error: unhandled exception: Parsing error at #14: expected "word" [NPegException]

The

NPegException
type contains the same two fields as
MatchResult
to indicate where in the subject string the match failed:
matchLen
and
matchMax
:
let a = patt 4 * E"boom"
try:
  doAssert a.match("12345").ok
except NPegException as e:
  echo "Parsing failed at position ", e.matchMax

Left recursion

NPeg does not support left recursion (this applies to PEGs in general). For example, the rule

A 

will cause an infinite loop because it allows for left-recursion of the non-terminal

A
.

Similarly, the grammar

A 

is problematic because it is mutually left-recursive through the non-terminal

B
.

Note that loops of patterns that can match the empty string will not result in the expected behavior. For example, the rule

*0
will cause the parser to stall and go into an infinite loop.

UTF-8 / Unicode

NPeg has no built-in support for Unicode or UTF-8, instead is simply able to parse UTF-8 documents just as like any other string. NPeg comes with a simple UTF-8 grammar library which should simplify common operations like matching a single code point or character class. The following grammar splits an UTF-8 document into separate characters/glyphs by using the

utf8.any
rule:
import npeg/lib/utf8

let p = peg "line": line utf8.any

let r = p.match("γνωρίζω") echo r.captures() # --> @["γ", "ν", "ω", "ρ", "ί", "ζ", "ω"]

Tracing and debugging

Syntax diagrams

When compiled with

-d:npegGraph
, NPeg will dump syntax diagrams (also known as railroad diagrams) for all parsed rules.

Syntax diagrams are sometimes helpful to understand or debug a grammar, or to get more insight in a grammars' complexity.

                              ╭─────────»──────────╮                     
                              │      ╭─────»──────╮│                     
                ╭╶╶╶╶╶╶╶╶╶╶╮  │      │  ━━━━      ││         ╭╶╶╶╶╶╶╶╮   
inf o──"INF:"─»───[number]───»┴─","─»┴┬─[lf]─»─1─┬┴┴»─[lf]─»───[url]────o
                ╰╶╶╶╶╶╶╶╶╶╶╯          ╰────«─────╯           ╰╶╶╶╶╶╶╶╯   
  • Optionals (
    ?
    ) are indicated by a forward arrow overhead.
  • Repeats ('+') are indicated by a backwards arrow underneath.
  • Literals (strings, chars, sets) are printed in purple.
  • Non-terminals are printed in cyan between square brackets.
  • Not-predicates (
    !
    ) are overlined in red. Note that the diagram does not make it clear that the input for not-predicates is not consumed.
  • Captures are boxed in a gray rectangle, optionally including the capture name.

Grammar graphs

NPeg can generate a graphical representation of a grammar to show the relations between rules. The generated output is a

.dot
file which can be processed by the Graphviz tool to generate an actual image file.

When compiled with

-d:npegDotDir=
, NPeg will generate a
.dot
file for each grammar in the code and write it to the given directory.

graph

  • Edge colors represent the rule relation: grey=inline, blue=call, green=builtin

  • Rule colors represent the relative size/complexity of a rule: black=<10, orange=10..100, red=>100

Large rules result in larger generated code and slow compile times. Rule size can generally be decreased by changing the rule order in a grammar to allow NPeg to call rules instead of inlining them.

Tracing

When compiled with

-d:npegTrace
, NPeg will dump its intermediate representation of the compiled PEG, and will dump a trace of the execution during matching. These traces can be used for debugging or optimization of a grammar.

For example, the following program:

let parser = peg "line":
  space 

will output the following intermediate representation at compile time. From the IR it can be seen that the

space
rule has been inlined in the
line
rule, but that the
word
rule has been emitted as a subroutine which gets called from
line
:
line:
   0: line           opCall 6 word        word
   1: line           opChoice 5           *(space * word)
   2:  space         opStr " "            ' '
   3: line           opCall 6 word        word
   4: line           opPartCommit 2       *(space * word)
   5:                opReturn

word: 6: word opSet '{'a'..'z'}' {'a' .. 'z'} 7: word opSpan '{'a'..'z'}' +{'a' .. 'z'} 8: opReturn

At runtime, the following trace is generated. The trace consists of a number of columns:

  1. The current instruction pointer, which maps to the compile time dump.
  2. The index into the subject.
  3. The substring of the subject.
  4. The name of the rule from which this instruction originated.
  5. The instruction being executed.
  6. The backtrace stack depth.
  0|  0|one two                 |line           |call -> word:6                          |
  6|  0|one two                 |word           |set {'a'..'z'}                          |
  7|  1|ne two                  |word           |span {'a'..'z'}                         |
  8|  3| two                    |               |return                                  |
  1|  3| two                    |line           |choice -> 5                             |
  2|  3| two                    | space         |chr " "                                 |*
  3|  4|two                     |line           |call -> word:6                          |*
  6|  4|two                     |word           |set {'a'..'z'}                          |*
  7|  5|wo                      |word           |span {'a'..'z'}                         |*
  8|  7|                        |               |return                                  |*
  4|  7|                        |line           |pcommit -> 2                            |*
  2|  7|                        | space         |chr " "                                 |*
   |  7|                        |               |fail                                    |*
  5|  7|                        |               |return (done)                           |

The exact meaning of the IR instructions is not discussed here.

Compile-time configuration

NPeg has a number of configurable setting which can be configured at compile time by passing flags to the compiler. The default values should be ok in most cases, but if you ever run into one of those limits you are free to configure those to your liking:

  • -d:npegPattMaxLen=N
    This is the maximum allowed length of NPeg's internal representation of a parser, before it gets translated to Nim code. The reason to check for an upper limit is that some grammars can grow exponentially by inlining of patterns, resulting in slow compile times and oversized executable size. (default: 4096)
  • -d:npegInlineMaxLen=N
    This is the maximum allowed length of a pattern to be inlined. Inlining generally results in a faster parser, but also increases code size. It is valid to set this value to 0; in that case NPeg will never inline patterns and use a calling mechanism instead, this will result in the smallest code size. (default: 50)
  • -d:npegRetStackSize=N
    Maximum allowed depth of the return stack for the parser. The default value should be high enough for practical purposes, the stack depth is only limited to detect invalid grammars. (default: 1024)
  • -d:npegBackStackSize=N
    Maximum allowed depth of the backtrace stack for the parser. The default value should be high enough for practical purposes, the stack depth is only limited to detect invalid grammars. (default: 1024)
  • -d:npegGcsafe
    This is a workaround for the case where NPeg needs to be used from a
    {.gcsafe.}
    context when using threads. This will mark the generated matching function to be
    {.gcsafe.}
    .

Tracing and debugging

NPeg has a number of compile time flags to enable tracing and debugging of the generated parser:

  • -d:npegTrace
    : Enable compile time and run time tracing. Please refer to the section 'Tracing' for more details.
  • -d:npegGraph
    : Dump syntax diagrams of all parsed rules at compile time.

These flags are meant for debugging NPeg itself, and are typically not useful to the end user:

  • -d:npegDebug
    : Enable more debug info. Meant for NPeg development debugging purposes only.
  • -d:npegExpand
    : Dump the generated Nim code for all parsers defined in the program. Meant for NPeg development debugging purposes only.

Random stuff and frequently asked questions

Why does NPeg not support regular PEG syntax?

The NPeg syntax is similar, but not exactly the same as the official PEG syntax: it uses some different operators, and prefix instead of postfix operators. The reason for this is that the NPeg grammar is parsed by a Nim macro in order to allow code block captures to embed Nim code, which puts some limitations on the available syntax. Also, NPeg's operators are chosen so that they have the right precedence for PEGs.

Can NPeg be used to parse EBNF grammars?

Almost, but not quite. Although PEGS and EBNF look quite similar, there are some subtle but important differences which do not allow a literal translation from EBNF to PEG. Notable differences are left recursion and ordered choice. Also, see "From EBNF to PEG" from Roman R. Redziejowski.

Examples

Parsing arithmetic expressions

let parser = peg "line":
  exp      

A complete JSON parser

The following PEG defines a complete parser for the JSON language - it will not produce any captures, but simple traverse and validate the document:

let s = peg "doc":
  S              

Captures

The following example shows how to use code block captures. The defined grammar will parse a HTTP response document and extract structured data from the document into a Nim object:

import npeg, strutils, tables

type Request = object proto: string version: string code: int message: string headers: Table[string, string]

HTTP grammar (simplified)

let parser = peg("http", userdata: Request): space +Alpha: userdata.proto = $1 version (+Digit * '.' * +Digit): userdata.version = $1 code +Digit: userdata.code = parseInt($1) msg (+(1 - '\r' - '\n')): userdata.message = $1 header header_name * ": " * >header_val: userdata.headers[$1] = $2 response

The resulting data:

(
  proto: "HTTP",
  version: "1.1",
  code: 301,
  message: "Moved Permanently",
  headers: {
    "Content-Length": "162",
    "Content-Type":
    "text/html",
    "Location": "https://nim.org/"
  }
)

More examples

More examples can be found in tests/examples.nim.

Future directions / Todos / Roadmap / The long run

Here are some things I'd like to have implemented one day. Some are hard and require me to better understand what I'm doing first. In no particular order:

  • Design and implement a proper API for code block captures. The current API feels fragile and fragmented (

    capture[], $1/$2, fail(), validate()
    ), and does not offer solid primitives to make custom match functions yet, something better should be in place before NPeg goes v1.0.
  • Resuming/streaming: The current parser is almost ready to be invoked multiple times, resuming parsing where it left off - this should allow parsing of (infinite) streams. The only problem not solved yet is how to handle captures: when a block of data is parsed it might contain data which must later be available to collect the capture. Not sure how to handle this yet.

  • Memoization: I guess it would be possible to add (limited) memoization to improve performance, but no clue where to start yet.

  • Parallelization: I wonder if parsing can parallelized: when reaching an ordered choice, multiple threads should be able to try to parse each individual choice. I do see problems with captures here, though.

  • I'm not happy about the

    {.gcsafe.}
    workaround. I'd be happy to hear any ideas on how to improve this.

We use cookies. If you continue to browse the site, you agree to the use of cookies. For more information on our use of cookies please see our Privacy Policy.