rx_fm, rx_power, and rx_sdr tools for receiving data from SDRs, based on rtl_fm, rtl_power, and rtl_sdr from librtlsdr, but using the SoapySDR vendor-neutral SDR support library instead, intended to support a wider range of devices than RTL-SDR
rx_fm,
rx_power, and
rx_sdrtools for receiving data from SDRs, based on
rtl_fm,
rtl_power, and
rtl_sdrfrom librtlsdr, but using the SoapySDR vendor-neutral SDR support library instead, intended to support a wider range of devices than RTL-SDR.
Install SoapySDR, then run:
cmake . make
After building, these binaries should then be available at the root directory:
rx_fm(based on
rtl_fm): demodulator for FM and other modes, see rtl_fm guide
rx_power(based on
rtl_power): FFT logger, see rtl_power
rx_sdr(based on
rtl_sdr): emits raw I/Q data
Tools from librtlsdr not included in this repository:
rtl_eeprom,
rtl_test,
rtl_ir: specific to RTL-SDR devices
rtl_tcp,
rtl_rpcd: remote networking, see SoapyRemote instead
rtl_adsb: see dump1090
Currently tested with an RTL-SDR dongle, a HackRF One, and bladeRF x40, primarily using
rx_fm, but supporting all devices supported by SoapySDR is the goal. Experimental, use at your own risk, but bug reports and patches are welcome.
See ChangeLog.md