📊 Simple package for monitoring and control your NVIDIA Jetson [Xavier NX, Nano, AGX Xavier, TX1, TX2]
jetson-stats is a package for monitoring and control your NVIDIA Jetson [Xavier NX, Nano, AGX Xavier, TX1, TX2] Works with all NVIDIA Jetson ecosystem.
sudo -H pip install -U jetson-stats
🚀 That's it! 🚀
PS: Don't forget to reboot your board
You can run jtop in your python script read here
If you need to install in a virtual environment like virtualenv, you must install before in your host and after in your environment, like:
virtualenv venv source venv/bin/activate pip install -U jetson-stats
It is a system monitoring utility that runs on the terminal and see and control realtime the status of your NVIDIA Jetson. CPU, RAM, GPU status and frequency and other...
The prompt interface will be show like this image, now clickable!:
You can run the jtop simple using a simple command
YES! Sudo is not more required!
console [email protected]:~/$ jtop
Other options are available with
-hoption: ```console [email protected]:~/$ jtop -h usage: jtop [-h] [--no-warnings] [--restore] [--loop] [-r REFRESH] [-p PAGE] [-v]
jtop is system monitoring utility and runs on terminal
optional arguments: -h, --help show this help message and exit --no-warnings Do not show warnings (default: False) --restore Reset Jetson configuration (default: False) --loop Automatically switch page every 5s (default: False) -r REFRESH, --refresh REFRESH refresh interval (default: 500) -p PAGE, --page PAGE Open fix page (default: 1) -v, --version show program's version number and exit ``` You can change page using left, right arrow or TAB to change page.
jtop have four different pages to control your NVIDIA Jetson: 1. ALL Are collected all information about your board: CPUs status, Memory, GPU, disk, fan and all status about jetsonclocks, NVPmodel and other 2. GPU A real time GPU history about your NVIDIA Jetson 3. CPU A real time CPU plot of NVIDIA Jetson 4. MEM A real time Memory chart and swap monitor 5. CTRL Enable/Disable **jetsonclocks, **nvpmodel or fan directly from here 6. INFO All information about libraries, CUDA, Serial Number, interfaces, ...
To control the your NVIDIA Jetson are available this keyboard commands:
In page 4 MEM: * c Clear cache * s Enable/Disable extra swap * + and - Increase and decrease swap size
In page 5 CTRL: * a Start/Stop jetsonclocks service (Note: jetsonclocks start only after 60s from up time) * e Enable/Disable jetsonclocks on board boot * + and - Increase and decrease the NVPmodel * f Manual/jetsonclocks mode for your fan * p and m Increase and decrease the Fan speed
Check jetson-stats health, enable/disable desktop, enable/disable jetson_clocks, improve the performance of your wifi are available only in one click using jetson_config
The command show the status and all information about your NVIDIA Jetson
Simple manager to switch on and switch off a swapfile in your jetson.
[email protected]:~/$ sudo jetson_swap -h usage: createSwapFile [[[-d directory ] [-s size] -a] | [-h] | [--off]] -d | --dir Directory to place swapfile -n | --name Name swap file -s | --size -a | --auto Enable swap on boot in /etc/fstab -t | --status Check if the swap is currently active --off Switch off the swap -h | --help This message
When you install jetson-stats in your bash will be available a list of new environment variables to know which which hardware version is available are you working, which Jetpack is installed and other variable show below