Automates running Apache JMeter on Amazon EC2
This shell script will allow you to run your local JMeter jmx files either using Amazon's EC2 service or you can provide it with a simple, comma-delimited list of hosts to use. Summary results are printed to the console as the script runs and then all result data is downloaded and concatenated to one file when the test completes ready for more detailed analysis offline.
By default it will launch the required hardware using Amazon EC2. Using AWS it is much easier and cheaper to scale your test over multiple slaves but if you need to you can also pass in a list of pre-prepared hostnames and the test load will be distributed over these instead. Using your own servers can be useful when the target server to be tested can not be easily accessed from a location external to your test network or you want to repeat a test iteratively.
The script does not use JMeter's Distributed Mode so you do not need to adjust the test parameters to ensure even distribution of the load; the script will automatically adjust the thread counts based on how many hosts are in use. As the test is running it will collate the results from each host in real time and display an output of the Generate Summary Results listener to the screen (showing both results host by host and an aggregated view for the entire run). Once execution is complete it will download each host's jtl file and collate them all together to give a single jtl file that can be viewed using the usual JMeter listeners.
~/Documents/WHERETOPUTMYSTUFF/. This is where you store your testplan and any associated files.
~/Documents/WHERETOPUTMYSTUFF/. You now have a template / example directory structure for your project.
INSTANCE_SECURITYGROUP="sg-123456"The ID of your security group (or groups) created under your Amazon account. It must allow Port 22 to the local machine running this script.
PEM_FILE="euwest1"Your Amazon key file.
PEM_PATH="/Users/oliver/.ec2"The directory (not the full filepath) where the Amazon PEM file is located. Important: No trailing '/'!
/testing/myprojectthen you should name the jmx file
count="1" ./path/to/jmeter-ec2.shWhere '1' is the number of instances you wish to spread the test over. If you have provided a list of hosts using
REMOTE_HOSTSthen this value is ignored and all hosts in the list will be used.
percent=20 count="3" terminate="TRUE" setup="TRUE" env="UAT" release="3.23" comment="my notes" ./jmeter-ec2.sh'
[count] - optional, default=1 [percent] - optional, default=100. Should be in the format 1-100 where 20 => 20% of threads will be run by the script. [setup] - optional, default=TRUE. Set to "FALSE" if a pre-defined host is being used that has already been setup (had files copied to it, jmeter installed, etc.) [terminate] - optional, default=TRUE. Set to "FALSE" if the instances created should not be terminated. [price] - optional, if specified spot instances will be requested at this price
AMI_ID="[A linix based AMI]"Recommended AMIs are provided in the jmeter-ec2.properties file. Both Java and JMeter are installed by the script dynamically if not present.
microtype instances do work and are good for developing but they are not recommended for important test runs. Performance can be slow and you risk affecting test results. Note: Older generation instance types require a different type of AMI (paravirtual vs. hmv).
USER="ubuntu"Different AMIs start with different basic users. This value could be 'ec2-user', 'root', 'admin' etc.
SUBNET_ID=""The id of the subnet that the instance will belong to. So long as a default VPC exists for your account you do not need to set this.
RUNNINGTOTAL_INTERVAL="3"How often running totals are printed to the screen. Based on a count of the summariser.interval property. (If the Generate Summary Results listener is set to wait 10 seconds then every 30 (3 * 10) seconds an extra row showing an aggregated summary will be printed.) The summariser.interval property in the standard jmeter.properties file defaults to 180 seconds - in the file included with this project it is set to 15 seconds, like this we default to summary updates every 45 seconds.
REMOTE_HOSTS=""If you do not wish to use ec2 you can provide a comma-separated list of pre-defined hosts.
REMOTE_PORT=""Specify the port sshd is running on for
REMOTE_HOSTSor ec2. Default 22.
ELASTIC_IPS=""If using ec2, then you can also provide a comma-separated list of pre-defined elastic IPs. This is useful if your test needs to pass through a firewall.
JMETER_VERSION="apache-jmeter-2.13"Allows the version to be chosen dynamically.
Thread Count, this value must be numeric.
copying install.sh to 1 server(s)...lost connection?
This happens when it is not possible for the script to connect over port 22 to the instance that was created by AWS. There are a number of reasons why this can happen.
First, can you telnet to the instance? Run the script to create a box but use:
Then, take the hostname of the instance just created and try:
telnet thehostname.com 22
If you see something like:
Trying thehostname.com... Connected to thehostname.com Escape character is '^]'. SSH-2.0-OpenSSH_6.6p1 Ubuntu-2ubuntu1
Then you DO have network access.
If you see:
You DO NOT have network access.
File permissions on your PEM file Your .pem files need to be secure. Use
chmod 600 yourfile.pem.
USERproperty is not correct Different AMIs and OSs expect you to log in using different users. Make sure this value is set correctly.
Install the latest version of the ec2-api-tools Check here and make sure you have the latest version installed. Use
$ ec2-versionto check.
Your Security Group is not configured properly The
INSTANCE_SECURITYGROUP_IDSproperty needs to reference the exact ids of one or more security group that exists in the correct region and that contains a rule that allows inbound traffic on port 22 from the machine you are running the script from, or everywhere if you are running the script remotely or just want to rule this out (be sure to reduce this scope later once you've got things working)
Check local network settings Often port 22 can be blocked by over-zealous local network security settings. You often see this with poor quality wifi services, the type where you have to fill out a marketing form to get access. You can sometimes get around this by using a vpn but often they block this too and then your only choice is to put down your flat white and leave.
By default this shell script uses on-demand instances. You can use spot instances by requesting an hourly
pricefor your EC2 instances.
count="3" price=0.0035 ./jmeter-ec2.sh'
Spot Instances allow you to name your own price for Amazon EC2 computing capacity. You simply bid on spare Amazon EC2 instances and run them whenever your bid exceeds the current Spot Price, which varies in real-time based on supply and demand. The Spot Instance pricing model complements the On-Demand and Reserved Instance pricing models, providing potentially the most cost-effective option for obtaining compute capacity, depending on your application.
Read more at http://aws.amazon.com/ec2/purchasing-options/spot-instances/
[price] - optional, if specified spot instances will be requested at this price [count] - optional, default=1
If your price is too low spot requests will fail with a status
To get the price history by instance type, use the
ec2-describe-spot-price-historycommand from AWS CLI :
For example to get current price for t1.micro instance running Linux :
ec2-describe-spot-price-history -H --instance-type t1.micro -d Linux/UNIX -s `date +"%Y-%m-%dT%H:%M:%SZ"`
Vagrant allows you to test your jmeter-ec2 scripts locally before pushing them to ec2.
jmeter-ec2.properties.vagrantas a template for local provisioning. This file is set up to use Vagrant's ssh key, ports, etc. ```
cp jmeter-ec2.properties jmeter-ec2.properties.bak
cp jmeter-ec2.properties.vagrant jmeter-ec2.properties
project="myproject" setup="TRUE" ./jmeter-ec2.sh ```
Vagrantfileto meet any specific networking needs. See Vagrant's networking documentation for details.
To find your key pairs go to your ec2 dashboard -> Networking and Security -> Key Pairs. Make sure this key pair is in the REGION you also set in the properties file.
To create or check your EC2 security groups go to your ec2 dashboard -> security groups.
Create a security group (e.g. called jmeter) that allows inbound access on port 22 from the IP of the machine where you are running the script.
It is not uncommon for an instance to fail to start, this is part of using the Cloud and for that reason this script will dynamically respond to this event by adjusting the number of instances that are used for the test. For example, if you request 10 instances but 1 fails then the test will be run using only 9 machines. This should not be a problem as the load will still be evenly spread and the end results (the throughput) identical. In a similar fashion, should Amazon not provide all the instances you asked for (each account is limited) then the script will also adjust to this scenario.
Any testplan should always have suitable pacing to regulate throughput. This script distributes load based on threads, it is assumed that these threads are setup with suitable timers. If not, adding more hardware could create unpredictable results.
JMeter-ec2 is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
JMeter-ec2 is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with JMeter-ec2. If not, see http://www.gnu.org/licenses/.
The source repository is at: https://github.com/oliverlloyd/jmeter-ec2