DNSViz is a tool suite for analysis and visualization of Domain Name System (DNS) behavior, including its security extensions (DNSSEC). This tool suite powers the Web-based analysis available at https://dnsviz.net/
DNSViz packages are available in repositories for popular operating systems, such as Debian, Ubuntu, and FreeBSD. DNSViz can also be installed on Mac OS X via Homebrew or MacPorts.
The remainer of this section covers other methods of installation, including a list of dependencies, installation to a virtual environment, and installation on Fedora and RHEL7.
Instructions for running in a Docker container are also available later in this document.
python (2.7, 3.5 - 3.9) - https://www.python.org/
dnspython (1.13.0 or later) - https://www.dnspython.org/
pygraphviz (1.3 or later) - https://pygraphviz.github.io/
M2Crypto (0.37.0 or later) - https://gitlab.com/m2crypto/m2crypto
Note that earlier versions of the software listed above might also work with DNSViz, but with some caveats. For example, M2Crypto 0.28.0 and later will work, but versions of M2Crypto earlier than 0.37.0 lack support for DNSSEC algorithms 15 (Ed25519) and 16 (Ed448). Also, while DNSViz itself still works with python 2.7, some versions of its software dependencies have moved on: pygraphviz 1.6 and dnspython 2.0.0 dropped support for python 2.7.
With OpenSSL version 1.1.0 and later, the OpenSSL GOST Engine is necessary to validate DNSSEC signatures with algorithm 12 (GOST R 34.10-2001) and create digests of type 3 (GOST R 34.11-94).
When using DNSViz for pre-deployment testing by specifying zone files and/or alternate delegation information on the command line (i.e., with
-N,
-x, or
-D),
named(8)is invoked to serve one or more zones. ISC BIND is only needed in this case, and
named(8)does not need to be running (i.e., as a server).
Note that default AppArmor policies for Debian are known to cause issues when invoking
named(8)from DNSViz for pre-deployment testing. Two solutions to this problem are to either: 1) create a local policy for AppArmor that allows
named(8)to run with fewer restrictions; or 2) disable AppArmor completely.
To install DNSViz to a virtual environment, first create and activate a virtual environment, and install the dependencies:
$ virtualenv ~/myenv $ source ~/myenv/bin/activate (myenv) $ pip install -r requirements.txt(Note that this installs the dependencies that are python packages, but some of these packages have non-python dependecies, such as Graphviz (required for pygraphviz) that are not installed automatically.)
Next download and install DNSViz from the Python Package Index (PyPI):
(myenv) $ pip install dnsvizor locally, from a downloaded or cloned copy of DNSViz:
(myenv) $ pip install .
Install the tools for building an RPM, and set up the rpmbuild tree.
$ sudo dnf install rpm-build rpmdevtools python3-devel $ rpmdev-setuptree
From within the DNSViz source directory, create a source distribution tarball and copy it and the DNSViz spec file to the appropriate rpmbuild subdirectories.
$ python3 setup.py sdist $ cp dist/dnsviz-*.tar.gz ~/rpmbuild/SOURCES/ $ cp contrib/dnsviz.spec ~/rpmbuild/SPECS/
Install dnspython, pygraphviz, and M2Crypto.
$ sudo dnf install python3-dns python3-pygraphviz python3-m2crypto(Note that as of Fedora 33, the latest version of M2Crypto is 0.35.2. If you would like support for DNSSEC algorithms 15 (Ed25519) and 16 (Ed448), you will need to install M2Crypto using
pip3. For example, see installation to a virtual environment.)
Build and install the DNSViz RPM.
$ rpmbuild -ba rpmbuild/SPECS/dnsviz.spec $ sudo rpm -iv rpmbuild/RPMS/noarch/dnsviz-*-1.*.noarch.rpm
Install pygraphviz, M2Crypto, and dnspython, after installing their build dependencies.
$ sudo yum install python3 gcc python3-devel graphviz-devel openssl-devel swig $ pip3 install --user pbr m2crypto pygraphviz dnspython
Install rpm-build tools, then build and install the DNSViz RPM.
$ sudo yum install rpm-build $ python3 setup.py bdist_rpm --install-script contrib/rpm-install.sh --distribution-name el7 $ sudo rpm -iv dist/dnsviz-*-1.noarch.rpm
Note that a custom install script is used to properly install the DNSViz man pages.
DNSViz is invoked using the
dnsvizcommand-line utility.
dnsvizitself uses several subcommands:
probe,
grok,
graph,
query. See the man pages associated with each subcommand, in the form of "dnsviz- (1)" (e.g., "man dnsviz-probe") for more detailed documentation and usage.
dnsviz probetakes one or more domain names as input and performs a series of queries to either recursive (default) or authoritative DNS servers, the results of which are serialized into JSON format.
Analyze the domain name example.com using your configured DNS resolvers (i.e., in
/etc/resolv.conf) and store the queries and responses in the file named "example.com.json":
$ dnsviz probe example.com > example.com.json
Same thing:
$ dnsviz probe -o example.com.json example.com
Analyze the domain name example.com by querying its authoritative servers directly:
$ dnsviz probe -A -o example.com.json example.com
Analyze the domain name example.com by querying explicitly-defined authoritative servers, rather than learning the servers through referrals from the IANA root servers:
$ dnsviz probe -A \ -x example.com:a.iana-servers.org=199.43.132.53,a.iana-servers.org=[2001:500:8c::53] \ -x example.com:b.iana-servers.org=199.43.133.53,b.iana-servers.org=[2001:500:8d::53] \ -o example.com.json example.com
Same, but have
dnsviz proberesolve the names:
$ dnsviz probe -A \ -x example.com:a.iana-servers.org,b.iana-servers.org \ -o example.com.json example.com
Analyze the domain name example.com and its entire ancestry by querying authoritative servers and following delegations, starting at the root:
$ dnsviz probe -A -a . -o example.com.json example.com
Analyze multiple names in parallel (four threads) using explicit recursive resolvers (replace 192.0.1.2 and 2001:db8::1 with legitimate resolver addresses):
$ dnsviz probe -s 192.0.2.1,[2001:db8::1] -t 4 -o multiple.json \ example.com sandia.gov verisignlabs.com dnsviz.net
dnsviz groktakes serialized query results in JSON format (i.e., output from
dnsviz probe) as input and assesses specified domain names based on their corresponding content in the input. The output is also serialized into JSON format.
Process the query/response output produced by
dnsviz probe, and store the serialized results in a file named "example.com-chk.json":
$ dnsviz grok < example.com.json > example.com-chk.json
Same thing:
$ dnsviz grok -r example.com.json -o example.com-chk.json example.com
Show only info-level information: descriptions, statuses, warnings, and errors:
$ dnsviz grok -l info -r example.com.json -o example.com-chk.json
Show descriptions only if there are related warnings or errors:
$ dnsviz grok -l warning -r example.com.json -o example.com-chk.json
Show descriptions only if there are related errors:
$ dnsviz grok -l error -r example.com.json -o example.com-chk.json
Use root key as DNSSEC trust anchor, to additionally indicate authentication status of responses:
$ dig +noall +answer . dnskey | awk '$5 % 2 { print $0 }' > tk.txt $ dnsviz grok -l info -t tk.txt -r example.com.json -o example.com-chk.json
Pipe
dnsviz probeoutput directly to
dnsviz grok:
$ dnsviz probe example.com | \ dnsviz grok -l info -o example.com-chk.json
Same thing, but save the raw output (for re-use) along the way:
$ dnsviz probe example.com | tee example.com.json | \ dnsviz grok -l info -o example.com-chk.json
Assess multiple names at once with error level:
$ dnsviz grok -l error -r multiple.json -o example.com-chk.json
dnsviz graphtakes serialized query results in JSON format (i.e., output from
dnsviz probe) as input and assesses specified domain names based on their corresponding content in the input. The output is an image file, a
dot(directed graph) file, or an HTML file, depending on the options passed.
Process the query/response output produced by
dnsviz probe, and produce a graph visually representing the results in a png file named "example.com.png".
$ dnsviz graph -Tpng < example.com.json > example.com.png
Same thing:
$ dnsviz graph -Tpng -o example.com.png example.com < example.com.json
Same thing, but produce interactive HTML format: interactive HTML output in a file named "example.com.html":
$ dnsviz graph -Thtml < example.com.json > example.com.html
Same thing (filename is derived from domain name and output format):
$ dnsviz graph -Thtml -O -r example.com.json
Use alternate DNSSEC trust anchor:
$ dig +noall +answer example.com dnskey | awk '$5 % 2 { print $0 }' > tk.txt $ dnsviz graph -Thtml -O -r example.com.json -t tk.txt
Pipe
dnsviz probeoutput directly to
dnsviz graph:
$ dnsviz probe example.com | \ dnsviz graph -Thtml -O
Same thing, but save the raw output (for re-use) along the way:
$ dnsviz probe example.com | tee example.com.json | \ dnsviz graph -Thtml -O
Process analysis of multiple domain names, creating an image for each name processed:
$ dnsviz graph -Thtml -O -r multiple.json
Process analysis of multiple domain names, creating a single image for all names.
$ dnsviz graph -Thtml -r multiple.json > multiple.html
dnsviz printtakes serialized query results in JSON format (i.e., output from
dnsviz probe) as input and assesses specified domain names based on their corresponding content in the input. The output is textual output suitable for file or terminal display.
Process the query/response output produced by
dnsviz probe, and output the results to the terminal:
$ dnsviz print < example.com.json
Use alternate DNSSEC trust anchor:
$ dig +noall +answer example.com dnskey | awk '$5 % 2 { print $0 }' > tk.txt $ dnsviz print -r example.com.json -t tk.txt
Pipe
dnsviz probeoutput directly to
dnsviz print:
$ dnsviz probe example.com | \ dnsviz print
Same thing, but save the raw output (for re-use) along the way:
$ dnsviz probe example.com | tee example.com.json | \ dnsviz print
dnsviz queryis a wrapper that couples the functionality of
dnsviz probeand
dnsviz printinto a tool with minimal dig-like usage, used to make analysis queries and return the textual output to terminal or file output in one go.
Analyze the domain name example.com using the first of your configured DNS resolvers (i.e., in
/etc/resolv.conf):
$ dnsviz query example.com
Same, but specify an alternate trust anchor:
$ dnsviz query +trusted-key=tk.txt example.com
Analyze example.com through the recursive resolver at 192.0.2.1:
$ dnsviz query @192.0.2.1 +trusted-key=tk.txt example.com
The examples in this section demonstrate usage of DNSViz for pre-deployment testing.
The following examples involve issuing diagnostic queries for a zone before it is ever delegated.
Issue queries against a zone file on the local system (
example.com.zone).
named(8)is invoked to serve the file locally:
$ dnsviz probe -A -x example.com+:example.com.zone example.com(Note the use of "+", which designates that the parent servers should not be queried for DS records.)
Issue queries to a server that is serving the zone:
$ dnsviz probe -A -x example.com+:192.0.2.1 example.com(Note that this server doesn't need to be a server in the NS RRset for example.com.)
Issue queries to the servers in the authoritative NS RRset, specified by name and/or address:
$ dnsviz probe -A \ -x example.com+:ns1.example.com=192.0.2.1 \ -x example.com+:ns2.example.com=192.0.2.1,ns2.example.com=[2001:db8::1] \ example.com
Specify the names and addresses corresponding to the future delegation NS records and (as appropriate) A/AAAA glue records in the parent zone (com):
$ dnsviz probe -A \ -N example.com:ns1.example.com=192.0.2.1 \ -N example.com:ns2.example.com=192.0.2.1,ns2.example.com=[2001:db8::1] \ example.com
Also supply future DS records:
$ dnsviz probe -A \ -N example.com:ns1.example.com=192.0.2.1 \ -N example.com:ns2.example.com=192.0.2.1,ns2.example.com=[2001:db8::1] \ -D example.com:dsset-example.com. \ example.com
The following examples involve issuing diagnostic queries for a delegated zone before changes are deployed.
Issue diagnostic queries for a new zone file that has been created but not yet been deployed (i.e., with changes to DNSKEY or other records):
$ dnsviz probe -A -x example.com:example.com.zone example.com(Note the absence of "+", which designates that the parent servers will be queried for DS records.)
Issue queries to a server that is serving the new version of the zone:
$ dnsviz probe -A -x example.com:192.0.2.1 example.com(Note that this server doesn't need to be a server in the NS RRset for example.com.)
The following examples involve issuing diagnostic queries for a delegated zone before changes are deployed to the delegation, glue, or DS records for that zone.
Specify the names and addresses corresponding to the new delegation NS records and (as appropriate) A/AAAA glue records in the parent zone (com):
$ dnsviz probe -A \ -N example.com:ns1.example.com=192.0.2.1 \ -N example.com:ns2.example.com=192.0.2.1,ns2.example.com=[2001:db8::1] \ example.com
Also supply the replacement DS records:
$ dnsviz probe -A \ -N example.com:ns1.example.com=192.0.2.1 \ -N example.com:ns2.example.com=192.0.2.1,ns2.example.com=[2001:db8::1] \ -D example.com:dsset-example.com. \ example.com
A ready-to-use docker container is available for use.
docker pull dnsviz/dnsviz
This section only covers Docker-related examples, for more information see the Usage section.
$ docker run dnsviz/dnsviz help $ docker run dnsviz/dnsviz query example.com
It might be useful to mount a local working directory into the container, especially when combining multiple commands or working with zone files.
$ docker run -v "$PWD:/data:rw" dnsviz/dnsviz probe dnsviz.net > probe.json $ docker run -v "$PWD:/data:rw" dnsviz/dnsviz graph -r probe.json -T png -O
When running authoritative queries, a host network is recommended.
$ docker run --network host dnsviz/dnsviz probe -4 -A example.com > example.json
Otherwise, you're likely to encounter the following error:
dnsviz.query.SourceAddressBindError: Unable to bind to local address (EADDRNOTAVAIL)
When performing complex analyses, where you need to combine multiple DNSViz commands, use bash redirection, etc., it might be useful to run the container interactively:
$ docker run --network host -v "$PWD:/data:rw" --entrypoint /bin/sh -ti dnsviz/dnsviz /data # dnsviz --help