Buildroot Environment for multiple TV WebKit ports using EGL and GLESv2, supporting WebGL, Canvas, HTML5 Video as a texture and more. One of the target devices supported is the Raspberry PI 2.
This buildroot fork will produce a very light-weight and trimmed down toolchain, rootfs and kernel for the multiple targets, including the Raspberry Pi 2. Mainly focused on enabling all HTML5 features WebKit in multiple ports.
You will need to install some packages on your host machine, for e.g. on Ubuntu 12.04:
sudo apt-get install build-essential git subversion cvs unzip whois ncurses-dev bc mercurial
For host machines with kernel 3.8 or higher (e.g. Ubuntu 13.04) you can use the experimental F2FS filesystem:
sudo apt-get install build-essential git subversion cvs unzip whois ncurses-dev bc mercurial f2fs-tools
When creating a VM please allocate a minimal of 30GB disk space.
git clone git://github.com/metrological/buildroot.git
git clone https://github.com/metrological/buildroot.git
Select a browser distribution for Qt5WebKit (qtbrowser)
or for WebKit Wayland (wpe)
If you want to add additional packages
Start the build (NOTICE: Don't use the -j switch, it's set to auto-detect)
You will need to create two partitions on your sdcard and copy files to the appropriate partitons.
The first (boot) is a small W95 FAT32 (LBA) partition of about 100 MB in size.
Notice you will need to replace sdx in the following commands with the actual device node for your sdcard.
# run the following as root mkfs.vfat -F 32 -n boot /dev/sdx1 mkdir -p /media/boot mount /dev/sdx1 /media/boot
You will need to copy all the files in output/images/rpi-firmware and the kernel from output/images/zImage to your boot partition.
# run the following as root cp output/images/rpi-firmware/* /media/boot cp output/images/zImage /media/boot sync umount /media/boot
The second (rootfs) can be as big in size as you prefer, but with a 200 MB minimum. It should be formatted as ext4.
# run the following as root mkfs.ext4 -L rootfs /dev/sdx2 mkdir -p /media/rootfs mount /dev/sdx2 /media/rootfs
You will need to extract output/images/rootfs.tar to the partition, as root.
# run the following as root tar -xvpsf output/images/rootfs.tar -C /media/rootfs # replace with your mount directory sync umount /media/rootfs
You can login to the system using ssh. The default password is set to root. It is configurable with make menuconfig.
ssh [email protected] # replace with your ip address
Please goto http://www.raspberrypi.org/phpBB3/viewtopic.php?f=38&t=43087
Would you like to join our team? Drop your details at [email protected] or fork this repository and send us your Pull Requests.
For the proprietary packages, e.g. Gstreamer Codec Pack and PlayReady support, please contact us at [email protected]